BMW E46 Front Narrow Drift Angle Lock Kit

$1,250.00
excluding VAT
In stock
SKU
WF046N
or View Spares

Wisefab narrow lock-kit for BMW E46 is similar to the PRO kit but has fewer features and does not widen the car as much. This is particularly beneficial if you want to keep the car in streetable condition or if you prefer to avoid excessive overfenders. With this kit, you can achieve a steering angle of up to 55 degrees.

  • Higher roll center
    Wisefab suspension kit brings the front roll center up on lowered cars, providing higher roll stiffness and letting to remove the front anti roll bar (swaybar) enabling maximum usable lock.
  • Revised steering geometry (Ackermann)
    Normally in a corner the inner wheel has a greater angle than the outer. For drifting this means loss of speed and grip and we have correted this for best performance.
  • Good camber control with high steering angles
    With high steering angles the leading wheel will have a positive camber, which is not a positive effect. It reduces the front grip and during turn or flip it creates a contact patch transition from inside edge to outside edge. It is not possible to eliminate it, but with our geometry it has decreased as much as possible.
  • Steering jacking control
    During drifting, when steering angle is much bigger, jacking is also bigger, even with the same geometry and it could become a problem. We have monitored it and changed the geometry that it doesn’t cause any handling issues.
  • Predictable self-alignment control
    With certain suspension geometry at high steering angles it could happen that the steering wheel is locking up at the end and driver needs to apply some force to flip it to other side. We know what causes it and have decreased it to minimum, if not eliminated it.

Kit includes:

  • Knuckle add-ons with hardware.
  • Lightweight lower control arms.
  • Assembeled tie rods.
  • Adjustable lower control arm rear mount.
  • Installation guide

Other components, packaging and clearance. 

  • This kit assumes coilovers to have enough clearance. 
  • Wider fenders or fender flares needed with this kit.
  • Perfect fit under OE E46 fender with 18x8.5" ET35 wheel (235/40 R18)
More Information
Make BMW
Field Drift
Placement Front
Prodmaster Name Narrow Drift Angle Lock Kit

Spare parts

All
Complete parts
Left Knuckle Add-on
Right Knuckle Add-on
Tie Rod Assembly
Lower Control Arm Mount V2

Complete parts

Complete parts

1
Knuckle Add-on
Left
WF046_100LA
$320.00
excluding VAT
Right
WF046_100RA
$320.00
excluding VAT
3
Tie Rod Assembly
WF036N_600A
$105.00
excluding VAT
4
Lower Control Arm Mount V2
WF460_210A
$105.00
excluding VAT

Left Knuckle Add-on

Left Knuckle Add-on

2
Conical Bolt D16.4 L63
WF030_901
$18.00
excluding VAT
3
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$2.30
excluding VAT
4
Nut Collar M12x1.50 RH ZN SPC
WF001_12X15
$13.00
excluding VAT
5
Bolt Hex M14x1.5x 70 RH 10.9 ST DIN 960
B01114150070R3SD960
$9.40
excluding VAT

Right Knuckle Add-on

Right Knuckle Add-on

2
Conical Bolt D16.4 L63
WF030_901
$18.00
excluding VAT
3
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$2.30
excluding VAT
4
Nut Collar M12x1.50 RH ZN SPC
WF001_12X15
$13.00
excluding VAT
5
Bolt Hex M14x1.5x 70 RH 10.9 ST DIN 960
B01114150070R3SD960
$9.40
excluding VAT

Tie Rod Assembly

Tie Rod Assembly

2
Tie Rod Inner M14x1.5 M14x1.5 L375
STIEROD_M14_M14_L375
$31.00
excluding VAT
3
Rod end 14x1.5 RH female CrMo
SRODEND14X1.5 RH F
$39.00
excluding VAT
4
Nut Collar M12x1.50 RH ZN SPC
WF001_12X15
$13.00
excluding VAT
5
Conical Bolt D16.4 L66
WF036_909
$23.00
excluding VAT
6
Spacer ID10 OD14 h 5.4
WF080_921
$11.00
excluding VAT
7
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
$2.30
excluding VAT
8
Rack Extender M14x1.5 M18x1.5 L24
WF900_901
$35.00
excluding VAT

Lower Control Arm Mount V2

Lower Control Arm Mount V2

2
Rod end 20x1.5 RH male CrMo
SRODEND 20X1.5 RH M
$48.00
excluding VAT
3
BMW E46 Front Right Control Arm Mount V2 Spacer
WF460_211
$11.00
excluding VAT
4
Bolt Allen M10x1.5x 40 RH 10.9 ZN DIN 912
B01210150040R3ZD912
$2.30
excluding VAT
Wisefab Nissan 240sx
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres Nissan 240sx for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."
Nissan 240sx Drift
“When I first installed a Wisefab lock kit it truly opened the door for some more aggressive driving style. I quickly began to expect nothing less than the massive angle and performance that Wisefab provides and installed a lock kit on all (4) of my Nissan 240sx that I currently drift. Also, after testing what I though was a very competitive rear suspension solution against the latest Wisefab rear kit, I was blown away with the apparent grip gain the rear Wisefab kit yielded. I am so thankful that Wisefab has poured so much effort into creating a bolt on suspension solution that transforms a Nissan 240sx into what I believe is still the most competitive drift chassis in the world."
Nissan 240sx Lock kit
"I love the Wisefab suspension kits used on my competition and demo vehicles, they provide all the angle and grip we love along with the strength and durability we need to compete with the best!"
Toyota 86 Drift
"I wouldn't have half the results! Only by running Wisefab in my Toyota 86 it just makes the car handle so good and let's me adjust set up pretty easy which is a massive help going from track to track!"