Toyota GT86 Rear V2 Suspension Drop Knuckle Kit

$2,400.00
excluding VAT
In stock
SKU
WF8611
or View Spares

The GT86 rear V2 kit is made of high strength steel. It is a bit heavier than the V1 kit, but it is stronger, stiffer and has more adjustment options and improved features. In addition, an optional MOD-kit can be added to V2, which allows you to increase the grip even more and add some extra speed to your car.

Toyota GT86 / Subaru BRZ / Scion FRS is a well designed car for enthusiast drivers. The car performs well on the streets and can be driven fast on a race track. If the focus is more towards performance, then the car will drive even better with lowered ride height, but then the factory designed kinematics won’t work as they are supposed to. Wisefab suspension kit brings the roll center, bumpsteer, anti-squat and camber curve back to normal range, provides better roll stiffness, handling and grip.

All knuckles, links and arms are made of high strength steel
CrMo rod ends and sphericals used instead of rubber bushings

Adjustable shock motion ratio
Shock motion ratio can be adjusted by changing the shocks position on the arm. It can be done quickly and has the effect of changing the springrate. This means that understeer or oversteer can be removed within a few minutes

Easy camber adjustment

Easy bump steer adjustment

Kit includes:

  • Pre-set suspension arms
  • Knuckles with hardware
  • Installation guide

Other information:

  • Track 40mm (20mm per side) wider than original. Please check the halfshaft length!
  • This kit assumes coilovers
  • Original wheel speed sensor can be used
  • Possibility to use with OEM bearing/hub, Nissan S-chassis bearing/hub or Lexus IS (XE20) bearing/hub
  • Minimum rim size is 17“
More Information
Make Toyota
Field Drift
Placement Rear
Prodmaster Name V2 Suspension Drop Knuckle Kit

Spare parts

All
Complete parts
Right Knuckle
Left Knuckle
Suspension Arm #2
Right Suspension Arm #3
Left Suspension Arm #3
Suspension Arm #4
Suspension Arm #5

Complete parts

Complete parts

1
Knuckle
Right
WF8611_100RA
$510.00
excluding VAT
Left
WF8611_100LA
$510.00
excluding VAT
2
Suspension Arm #2
WF861_200A
$365.00
excluding VAT
3
Suspension Arm #3
Right
WF8611_300RA
$470.00
excluding VAT
Left
WF8611_300LA
$470.00
excluding VAT
4
Suspension Arm #4
WF8611_400A
$365.00
excluding VAT
5
Suspension Arm #5
WF861_500A
$220.00
excluding VAT

Right Knuckle

Right Knuckle

3
Hub Spacer Plate
WF8611_501
$90.00
excluding VAT
4
Bolt Hex M12x1.5x 60 RH 10.9 ST DIN 960
B01112150060R3SD960
$6.40
excluding VAT
5
Washer Flat M12 ZN DIN125
B03112NAZD125
$2.30
excluding VAT
6
Camber Adjustment Plate
WF700_911
$20.00
excluding VAT
7
Bolt SetScrew M 8x1.25x 39.6 RH 10.9 ZN SPC
WFS22_905
$13.00
excluding VAT
8
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
$2.30
excluding VAT
9
Washer Flat M10 ZN DIN125
B03110NAZD125
$2.30
excluding VAT
10
Bolt Hex M10x1.5x 75 RH 10.9 ST DIN 931
B01110150075R3SD931
$4.30
excluding VAT
11
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
B01110150060R3SD931
$4.30
excluding VAT
12
Bolt Hex M10x1.5x 55 RH 10.9 ST DIN 931
B01110150055R3SD931
$4.30
excluding VAT
13
Washer ID10 OD24.5 h 2
WF861_112
$9.40
excluding VAT

Left Knuckle

Left Knuckle

3
Hub Spacer Plate
WF8611_501
$90.00
excluding VAT
4
Bolt Hex M12x1.5x 60 RH 10.9 ST DIN 960
B01112150060R3SD960
$6.40
excluding VAT
5
Washer Flat M12 ZN DIN125
B03112NAZD125
$2.30
excluding VAT
6
Camber Adjustment Plate
WF700_911
$20.00
excluding VAT
7
Bolt SetScrew M 8x1.25x 39.6 RH 10.9 ZN SPC
WFS22_905
$13.00
excluding VAT
8
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
$2.30
excluding VAT
9
Washer Flat M10 ZN DIN125
B03110NAZD125
$2.30
excluding VAT
10
Bolt Hex M10x1.5x 75 RH 10.9 ST DIN 931
B01110150075R3SD931
$4.30
excluding VAT
11
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
B01110150060R3SD931
$4.30
excluding VAT
12
Bolt Hex M10x1.5x 55 RH 10.9 ST DIN 931
B01110150055R3SD931
$4.30
excluding VAT
13
Washer ID10 OD24.5 h 2
WF861_112
$9.40
excluding VAT

Suspension Arm #2

Suspension Arm #2

2
Spacer ID12 OD16 h10
WF013_903
$13.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
5
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$2.30
excluding VAT
6
Spherical ID16/OD32
SSPHERICAL 16/32
$38.00
excluding VAT

Right Suspension Arm #3

Right Suspension Arm #3

2
Spacer ID12 OD16 h19
WF861_901
$13.00
excluding VAT
3
Spherical ID16/OD32
SSPHERICAL 16/32
$38.00
excluding VAT
4
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$2.30
excluding VAT
5
Spacer ID12 OD16 h14.5
WF113_913
$13.00
excluding VAT
6
Spacer ID10 OD12 h10.5
WF113_902
$11.00
excluding VAT
7
C-Clip InternalSTD d26 ST DIN472
B04126SD472
$2.30
excluding VAT
8
Spherical ID12/OD26
SSPHERICAL 12/26
$35.00
excluding VAT

Left Suspension Arm #3

Left Suspension Arm #3

2
Spacer ID12 OD16 h19
WF861_901
$13.00
excluding VAT
3
Spherical ID16/OD32
SSPHERICAL 16/32
$38.00
excluding VAT
4
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$2.30
excluding VAT
5
Spacer ID12 OD16 h14.5
WF113_913
$13.00
excluding VAT
6
Spacer ID10 OD12 h10.5
WF113_902
$11.00
excluding VAT
7
C-Clip InternalSTD d26 ST DIN472
B04126SD472
$2.30
excluding VAT
8
Spherical ID12/OD26
SSPHERICAL 12/26
$35.00
excluding VAT

Suspension Arm #4

Suspension Arm #4

2
Spacer ID12 OD16 h13.5
WFGD4_904
$13.00
excluding VAT
3
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$2.30
excluding VAT
4
Spherical ID16/OD32
SSPHERICAL 16/32
$38.00
excluding VAT
5
Spacer ID10 OD14 h 9
WF861_903
$11.00
excluding VAT
6
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$31.00
excluding VAT
7
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$4.30
excluding VAT

Suspension Arm #5

Suspension Arm #5

2
Spacer ID14 OD16 h10
WF036_903
$13.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
5
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$4.30
excluding VAT
6
Spacer ID10 OD14 h 5.4
WF080_921
$11.00
excluding VAT
7
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$31.00
excluding VAT
Wisefab Nissan 240sx
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres Nissan 240sx for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."
Nissan 240sx Drift
“When I first installed a Wisefab lock kit it truly opened the door for some more aggressive driving style. I quickly began to expect nothing less than the massive angle and performance that Wisefab provides and installed a lock kit on all (4) of my Nissan 240sx that I currently drift. Also, after testing what I though was a very competitive rear suspension solution against the latest Wisefab rear kit, I was blown away with the apparent grip gain the rear Wisefab kit yielded. I am so thankful that Wisefab has poured so much effort into creating a bolt on suspension solution that transforms a Nissan 240sx into what I believe is still the most competitive drift chassis in the world."
Nissan 240sx Lock kit
"I love the Wisefab suspension kits used on my competition and demo vehicles, they provide all the angle and grip we love along with the strength and durability we need to compete with the best!"
Toyota 86 Drift
"I wouldn't have half the results! Only by running Wisefab in my Toyota 86 it just makes the car handle so good and let's me adjust set up pretty easy which is a massive help going from track to track!"