Make and Model
Fender Arch Height from Ground (mm)
Tire Height or Diameter
The original location of the steering rack on the Subaru BRZ, which is equipped with a boxer engine, is not very suitable for drifting. To address this issue, the steering rack has been relocated from under the front cross-member, allowing for the use of various engines, including the boxer, I6/V8, and others. To use the kit, a Lexus IS 1st generation (XE10 1998-2005) hydraulic steering rack is required. The kit includes the steering rack attachment/cross-member insert and cross-member supports, but a modification of the cross-member through DIY cutting and welding is necessary.
Want to know how does Wisefab Subaru BRZ Lock kit fit your drift car check the link CHECK FITMENT below or here!
Check out the Subaru BRZ Rear Suspension kit
Scroll down to order the spare parts for your Subaru BRZ front lock kit conveniently right here!
Here is our recommended alignment parameters:
Toe in/out: If Ackermann is 0 or negative then toe is 2mm out. If Ackermann is positive then toe is 0
Caster: 5,5 +/-0,5
|Prodmaster Name||Lock Kit for Lexus IS Rear Rack|