Infiniti G35 Rear Suspension Drop Knuckle Kit

Special Price $1,890.00 Regular Price $2,100.00
excluding VAT
In stock
SKU
WF351
or View Spares

Wisefab Infinity G35 Rear Suspension kit will give a good kinematics with lowered car - higher roll center, lowered antisquat, revised camber gain and bump steer for maximum grip. Built in anti-squat and camber adjustment. All the links are pre set by Wisefab. No need to change the lenghts. Easy to install and set up. Every nut and bolt is available for spare parts. Scroll down to order your psare parts here. 

Check out the  Infinity G35 Angle kit.

Here is our recommended alignment parameters:
Toe in/out: 3-10mm toe in/per side
Camber: -0,5

Read full description
  • Revised kinematics, not just dropped knuckle.
    The top arm front pickup point is raised by 40mm for better antisquat. This correlates with all the known championship regulations. For lower grip and wet conditions the original pickup point can be used as well.
  • About the same weight as original aluminium suspension.
    All the metal components on Infiniti G35 rear suspension are from high strenght steel, including sheetmetal components, tubes, tube ends and rod end housings. Rod ends and spherical bearings used, no rubber bushings.
  • Easy camber adjustment.
    Special teethed washer is used for adjustment.
  • Bump steer adjustment.
    Possibility to adjust bump steer by changing rod end location in a slot.
  • Anti-squat adjustment.
    Possibility to adjust anti-squat by changing the top forward link height on upright.
  • Adjustable antiroll bar (swaybar) motion ratio.
    There are 3 possibilities for antiroll bar drop link attachments. 
    Changing antiroll bar motion ratio is quick and easy way to tune your car understeer/oversteer.

 

Kit includes:

  • Pre-set suspension links.
  • Knuckles with hardware.
  • Pick-up point relocating bracket.
  • Installation guide.

 

Other components

  • Hub to hub length (track) is the same as original, as this is defined by halfshaft lengths.
  • This kit assumes coilovers to adjust ride height and use spring around the shock not on rear link.
  • Possibility to use Nissan S-Chassis hub with bigger CV joint.
  • Minimum rim size is 17“
More Information
Make Infiniti
Field Drift
Placement Rear
Prodmaster Name Suspension Drop Knuckle Kit
Wisefab Nissan 240sx
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres Nissan 240sx for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."
Nissan 240sx Drift
“When I first installed a Wisefab lock kit it truly opened the door for some more aggressive driving style. I quickly began to expect nothing less than the massive angle and performance that Wisefab provides and installed a lock kit on all (4) of my Nissan 240sx that I currently drift. Also, after testing what I though was a very competitive rear suspension solution against the latest Wisefab rear kit, I was blown away with the apparent grip gain the rear Wisefab kit yielded. I am so thankful that Wisefab has poured so much effort into creating a bolt on suspension solution that transforms a Nissan 240sx into what I believe is still the most competitive drift chassis in the world."
Nissan 240sx Lock kit
"I love the Wisefab suspension kits used on my competition and demo vehicles, they provide all the angle and grip we love along with the strength and durability we need to compete with the best!"
Toyota 86 Drift
"I wouldn't have half the results! Only by running Wisefab in my Toyota 86 it just makes the car handle so good and let's me adjust set up pretty easy which is a massive help going from track to track!"

Spare parts

All
Complete parts
Right Knuckle
Left Knuckle
Suspension Arm #2
Left Suspension Arm #3
Right Suspension Arm #3
Suspension Arm #4
Suspension Arm #5
Arm #3 Relocating Bracket

Complete parts

Complete parts

1
Knuckle
Right
WF371_100RA
Special Price $387.00 Regular Price $430.00
excluding VAT
Left
WF371_100LA
Special Price $387.00 Regular Price $430.00
excluding VAT
2
Suspension Arm #2
WF351_200A
Special Price $162.00 Regular Price $180.00
excluding VAT
3
Suspension Arm #3
Left
WF351_300LA
Special Price $315.00 Regular Price $350.00
excluding VAT
Right
WF351_300RA
Special Price $315.00 Regular Price $350.00
excluding VAT
4
Suspension Arm #4
WF351_400A
Special Price $162.00 Regular Price $180.00
excluding VAT
5
Suspension Arm #5
WF351_500A
Special Price $162.00 Regular Price $180.00
excluding VAT
6
Arm #3 Relocating Bracket
WF351_700A
Special Price $58.50 Regular Price $65.00
excluding VAT

Right Knuckle

Right Knuckle

1
Knuckle
Right
WF371_100RA
Special Price $387.00 Regular Price $430.00
excluding VAT
2
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
B01112150070R3SD960
Special Price $7.11 Regular Price $7.90
excluding VAT
3
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
Special Price $1.71 Regular Price $1.90
excluding VAT
4
Washer FlatSmall M10 ZN DIN433
B03210NAZD433
Special Price $1.71 Regular Price $1.90
excluding VAT
5
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
Special Price $1.71 Regular Price $1.90
excluding VAT
6
Camber Adjustmen
WF351_118
Special Price $4.77 Regular Price $5.30
excluding VAT
7
Bolt Hex M10x1.5x 90 RH 10.9 ST DIN 931
B01110150090R3SD931
Special Price $4.77 Regular Price $5.30
excluding VAT
8
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
B01110150060R3SD931
Special Price $3.15 Regular Price $3.50
excluding VAT
9
Bolt Hex M10x1.5x 65 RH 10.9 ST DIN 931
B01110150065R3SD931
Special Price $3.15 Regular Price $3.50
excluding VAT
10
Hub Spacer
WF371_102
Special Price $8.19 Regular Price $9.10
excluding VAT
11
Spacer ID12 OD16 h14.5
WF113_913
Special Price $9.90 Regular Price $11.00
excluding VAT
12
C-Clip InternalSTD d32 ST DIN472
B04132SD472
Special Price $1.71 Regular Price $1.90
excluding VAT
13
Spherical ID16/OD32
SSPHERICAL 16/32
Special Price $27.90 Regular Price $31.00
excluding VAT
14
BushingT ID10 OD24 h10
WF901_905
Special Price $8.19 Regular Price $9.10
excluding VAT
15
Washer Flat M12 ZN DIN125
B03112NAZD125
Special Price $1.71 Regular Price $1.90
excluding VAT

Left Knuckle

Left Knuckle

1
Knuckle
Left
WF371_100LA
Special Price $387.00 Regular Price $430.00
excluding VAT
2
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
B01112150070R3SD960
Special Price $7.11 Regular Price $7.90
excluding VAT
3
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
Special Price $1.71 Regular Price $1.90
excluding VAT
4
Washer FlatSmall M10 ZN DIN433
B03210NAZD433
Special Price $1.71 Regular Price $1.90
excluding VAT
5
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
Special Price $1.71 Regular Price $1.90
excluding VAT
6
Camber Adjustmen
WF351_118
Special Price $4.77 Regular Price $5.30
excluding VAT
7
Bolt Hex M10x1.5x 90 RH 10.9 ST DIN 931
B01110150090R3SD931
Special Price $4.77 Regular Price $5.30
excluding VAT
8
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
B01110150060R3SD931
Special Price $3.15 Regular Price $3.50
excluding VAT
9
Bolt Hex M10x1.5x 65 RH 10.9 ST DIN 931
B01110150065R3SD931
Special Price $3.15 Regular Price $3.50
excluding VAT
10
Hub Spacer
WF371_102
Special Price $8.19 Regular Price $9.10
excluding VAT
11
Spacer ID12 OD16 h14.5
WF113_913
Special Price $9.90 Regular Price $11.00
excluding VAT
12
C-Clip InternalSTD d32 ST DIN472
B04132SD472
Special Price $1.71 Regular Price $1.90
excluding VAT
13
Spherical ID16/OD32
SSPHERICAL 16/32
Special Price $27.90 Regular Price $31.00
excluding VAT
14
BushingT ID10 OD24 h10
WF901_905
Special Price $8.19 Regular Price $9.10
excluding VAT
15
Washer Flat M12 ZN DIN125
B03112NAZD125
Special Price $1.71 Regular Price $1.90
excluding VAT

Suspension Arm #2

Suspension Arm #2

1
Suspension Arm #2
WF351_200A
Special Price $162.00 Regular Price $180.00
excluding VAT
2
Spacer ID12 OD14 h15.5
WF351_902
Special Price $9.90 Regular Price $11.00
excluding VAT
3
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
Special Price $23.40 Regular Price $26.00
excluding VAT
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
Special Price $3.15 Regular Price $3.50
excluding VAT
5
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
Special Price $3.15 Regular Price $3.50
excluding VAT
6
Spacer ID12 OD16 h10
WF013_903
Special Price $9.90 Regular Price $11.00
excluding VAT
7
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
Special Price $29.70 Regular Price $33.00
excluding VAT

Left Suspension Arm #3

Left Suspension Arm #3

1
Suspension Arm #3
Left
WF351_300LA
Special Price $315.00 Regular Price $350.00
excluding VAT
2
Spacer ID12 OD16 h14.5
WF113_913
Special Price $9.90 Regular Price $11.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
Special Price $29.70 Regular Price $33.00
excluding VAT
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
Special Price $3.15 Regular Price $3.50
excluding VAT
5
Spacer ID12 OD16 h 8.5
WF351_904
Special Price $8.19 Regular Price $9.10
excluding VAT
6
Spacer ID10 OD12 h14
WF080_906
Special Price $9.90 Regular Price $11.00
excluding VAT
7
C-Clip InternalSTD d26 ST DIN472
B04126SD472
Special Price $1.71 Regular Price $1.90
excluding VAT
8
Spherical ID12/OD26
SSPHERICAL 12/26
Special Price $26.10 Regular Price $29.00
excluding VAT

Right Suspension Arm #3

Right Suspension Arm #3

1
Suspension Arm #3
Right
WF351_300RA
Special Price $315.00 Regular Price $350.00
excluding VAT
2
Spacer ID12 OD16 h14.5
WF113_913
Special Price $9.90 Regular Price $11.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
Special Price $29.70 Regular Price $33.00
excluding VAT
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
Special Price $3.15 Regular Price $3.50
excluding VAT
5
Spacer ID12 OD16 h 8.5
WF351_904
Special Price $8.19 Regular Price $9.10
excluding VAT
6
Spacer ID10 OD12 h14
WF080_906
Special Price $9.90 Regular Price $11.00
excluding VAT
7
C-Clip InternalSTD d26 ST DIN472
B04126SD472
Special Price $1.71 Regular Price $1.90
excluding VAT
8
Spherical ID12/OD26
SSPHERICAL 12/26
Special Price $26.10 Regular Price $29.00
excluding VAT

Suspension Arm #4

Suspension Arm #4

1
Suspension Arm #4
WF351_400A
Special Price $162.00 Regular Price $180.00
excluding VAT
2
Conical Bolt
WF351_903
Special Price $21.60 Regular Price $24.00
excluding VAT
3
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
Special Price $23.40 Regular Price $26.00
excluding VAT
4
Washer Flat M10 ZN DIN125
B03110NAZD125
Special Price $1.71 Regular Price $1.90
excluding VAT
5
Bolt Hex M10x1.5x 20 RH 10.9 ST DIN 933
B01110150020R3SD933
Special Price $1.71 Regular Price $1.90
excluding VAT
6
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
Special Price $3.15 Regular Price $3.50
excluding VAT
7
Nut Thin M12x1.5 RH 8.8 ZN DIN936/439
B02312150R2ZD936/439
Special Price $3.15 Regular Price $3.50
excluding VAT
8
Spacer ID10 OD12 h10.5
WF113_902
Special Price $8.19 Regular Price $9.10
excluding VAT
9
Rod end 12x1.5 RH male CrMo
SRODEND12X1.5 RH M
Special Price $23.40 Regular Price $26.00
excluding VAT

Suspension Arm #5

Suspension Arm #5

1
Suspension Arm #5
WF351_500A
Special Price $162.00 Regular Price $180.00
excluding VAT
2
Spacer ID12 OD14 h12.5
WF351_901
Special Price $9.90 Regular Price $11.00
excluding VAT
3
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
Special Price $23.40 Regular Price $26.00
excluding VAT
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
Special Price $3.15 Regular Price $3.50
excluding VAT
5
Nut Thin M12x1.5 RH 8.8 ZN DIN936/439
B02312150R2ZD936/439
Special Price $3.15 Regular Price $3.50
excluding VAT
6
Spacer ID10 OD12 h14
WF080_906
Special Price $9.90 Regular Price $11.00
excluding VAT
7
Rod end 12x1.5 RH male CrMo
SRODEND12X1.5 RH M
Special Price $23.40 Regular Price $26.00
excluding VAT

Arm #3 Relocating Bracket

Arm #3 Relocating Bracket

1
Arm #3 Relocating Bracket
WF351_700A
Special Price $58.50 Regular Price $65.00
excluding VAT
2
Bolt Hex M10x1.5x 20 RH 10.9 ST DIN 933
B01110150020R3SD933
Special Price $1.71 Regular Price $1.90
excluding VAT
3
Washer Flat M10 ZN DIN125
B03110NAZD125
Special Price $1.71 Regular Price $1.90
excluding VAT
4
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
Special Price $1.71 Regular Price $1.90
excluding VAT
5
Bolt Allen M12x1.5x 60 RH 12.9 ST DIN 912
B01212150060R4SD912
Special Price $8.19 Regular Price $9.10
excluding VAT
6
WasherT ID13 OD30 h 4
WF351_702
Special Price $4.77 Regular Price $5.30
excluding VAT
7
Nut Collar M12x1.50 RH ZN SPC
WF001_12X15
Special Price $9.90 Regular Price $11.00
excluding VAT
8
BushingT ID12 OD24 h43
WF351_905
Special Price $9.90 Regular Price $11.00
excluding VAT