Tesla Model 3 RWD Front Drift Angle Lock Kit
$3,300.00
excluding VAT
In stock
SKU
WFT30
The Wisefab angle kit for Tesla Model 3 is engineered from the ground up to combine innovation, strength, and performance for electric vehicle drifting. Unlike simple modifications, this is a complete bolt-on solution that ensures your Tesla maintains its factory-like look while gaining the aggressive steering angle, stability, and adjustability required for serious drifting. Whether you are drifting for fun or aiming to participate at grassroots competitions, the kit guarantees confidence, precision, and control in every corner.
A standout feature of this kit is the steering rack conversion that allows to install the BMW E9X/E8X electric steering rack (not included). By replacing the OEM Tesla rack with a BMW E9X/E8X unit, you gain a steering system that is stronger, more precise, and provides superior self-steer characteristics — essential for smooth, predictable drift transitions. This upgrade ensures that the steering feel matches the performance potential of the suspension setup.
Please note: this kit is designed for motorsport use only and is not street legal.
- 55+ degrees of steering angle
- Adjustable Ackermann
Tune your steering geometry towards either positive or negative Ackermann in just a few minutes, even trackside, without messing up an alignment. - Adjustable lock stops
- High strength drift-specific knuckles
Upgraded kinematics and durability - One-piece lower control arm design with quick caster adjustment
Lower control arm has built-in, easy to use quick caster adjuster. - Precise camber control and minimal bump-steer with high steering angles
With our kinematics we have engineered the camber to provide very good front grip and the bump-steer to be minimal throughout the range of steering. - Consistent and predictable self-alignment torque
With our setup the steering wheel moves towards the direction of wheel movement and will not stuck at full lock.
Kit includes:
- Knuckles with hardware
- Lower control arms
- Upper control arms
- Assembled tie rods
- BMW Electric steering rack conversion kit (rack is not included)
- Wisefab EPS module with wiring
- Installation guide
Other components, packaging and clearance.
- This kit assumes coilovers for clearance and height adjustment.
- Depending on wheel width and ET, wider fenders or fender flares may be needed.
- Minimum wheel diameter is 18”
- Please note: this kit is designed for motorsport use only and is not street legal.
- Please note, using a BMW steering rack will trigger warning messages on the Tesla's display.
| Field | Drift |
|---|---|
| Placement | Front |
| Prodmaster Name | Drift Angle Lock Kit |
Spare parts
All
Complete parts
Left Knuckle
Right Knuckle
Left Lower Control Arm
Right Lower Control Arm
Left Upper Control Arm
Right Upper Control Arm
Tie Rod Assembly
BMW E9x Steering Rack Conversion
BMW E9x Steering Rack Conversion Wiring Kit
Complete parts
Complete parts
4
Tie Rod Assembly
5
BMW E9x Steering Rack Conversion
7
BMW E9x Steering Rack Conversion Wiring Kit
Left Knuckle
Left Knuckle
4
BushingT ID 8 OD22 h41 Excentric Lock Stopper
5
Nut Hex Flange M10x1.5 RH 8.8 ZN
7
Ackermann Washer Round 0 offset
8
Ackermann Washer Round 3 Offset
9
Ackermann Washer Round 6 Offset
10
350Z/370Z Single Shear Mount
11
Bolt Allen M8X1.25X12.5 RH 12.9 ZN
Right Knuckle
Right Knuckle
4
BushingT ID 8 OD22 h41 Excentric Lock Stopper
5
Nut Hex Flange M10x1.5 RH 8.8 ZN
7
Ackermann Washer Round 0 offset
8
Ackermann Washer Round 3 Offset
9
Ackermann Washer Round 6 Offset
10
350Z/370Z Single Shear Mount
11
Bolt Allen M8X1.25X12.5 RH 12.9 ZN
Left Lower Control Arm
Left Lower Control Arm
2
Control Arm Rear Fixing
3
Spacer ID14 OD16 h19
4
Rod end 18x1.5 RH male CrMo
6
Nut Thin M18x1.5 RH 8.8 ZN DIN936/439
7
Bolt HexFlange M10x1.5x 40 RH 10.9 ZF MBN10105
8
Lower Control Arm Mount
9
Spacer ID12 OD16 h22
10
Spacer ID12 OD16 h14.5
11
C-Clip InternalSTD d32 ST DIN472
12
Spherical ID16/OD32
Right Lower Control Arm
Right Lower Control Arm
2
Control Arm Rear Fixing
3
Spacer ID14 OD16 h19
4
Rod end 18x1.5 RH male CrMo
6
Nut Thin M18x1.5 RH 8.8 ZN DIN936/439
7
Bolt HexFlange M10x1.5x 40 RH 10.9 ZF MBN10105
8
Lower Control Arm Mount
9
Spacer ID12 OD16 h22
10
Spacer ID12 OD16 h14.5
11
C-Clip InternalSTD d32 ST DIN472
12
Spherical ID16/OD32
Left Upper Control Arm
Left Upper Control Arm
2
Spacer ID10 OD14 h15.5
3
Rod end 14x1.5 LH male CrMo
4
Double Adjuster Locknut M14x1.5LH Allen
6
Spherical ID12/OD26
7
C-Clip InternalSTD d26 ST DIN472
8
Double Adjuster Female/Male M16x1.5 M22x1.5 Allen
Right Upper Control Arm
Right Upper Control Arm
2
Spacer ID10 OD14 h15.5
3
Rod end 14x1.5 LH male CrMo
4
Double Adjuster Locknut M14x1.5LH Allen
6
Spherical ID12/OD26
7
C-Clip InternalSTD d26 ST DIN472
8
Double Adjuster Female/Male M16x1.5 M22x1.5 Allen
Tie Rod Assembly
Tie Rod Assembly
2
Rack Extender M14x1.5 M18x1.5 L20
3
Tie Rod Inner M14x1.5 M14x1.5 L375
4
Rod end 14x1.5 RH female CrMo
5
Spacer ID10 OD14 h 9
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres Nissan 240sx for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."
“When I first installed a Wisefab lock kit it truly opened the door for some more aggressive driving style. I quickly began to expect nothing less than the massive angle and performance that Wisefab provides and installed a lock kit on all (4) of my Nissan 240sx that I currently drift. Also, after testing what I though was a very competitive rear suspension solution against the latest Wisefab rear kit, I was blown away with the apparent grip gain the rear Wisefab kit yielded. I am so thankful that Wisefab has poured so much effort into creating a bolt on suspension solution that transforms a Nissan 240sx into what I believe is still the most competitive drift chassis in the world."
"I love the Wisefab suspension kits used on my competition and demo vehicles, they provide all the angle and grip we love along with the strength and durability we need to compete with the best!"
"I wouldn't have half the results! Only by running Wisefab in my Toyota 86 it just makes the car handle so good and let's me adjust set up pretty easy which is a massive help going from track to track!"
