BMW E36 Rear Suspension kit for E32 210Diff

$4,400.00
excluding VAT
In stock
SKU
WF366_TYP210
or View Spares

BMW E36 Rear Rally Kit

Read full description

BMW E36 Complete Rear Axle for Rally

  • The main idea with Wisefab axle is to have better kinematics for long stroke and soft suspension and therefore more rear grip, especially sidegrip in the corners on throttle. Some kinematic differences are less rollcentre migration, good camber gain at rideheight, but smaller at full droop compare to original, different antisquat curve, less scrub(track change) with vertical movement, good bumpsteer etc.
  • Better ground clearance. Arms and links are placed higher to have less risk of hitting rocks with suspension components. That could also end up with lowered rideheight with better handling and more grip.
  • BMW TYP 210 differential. The differential is a structural part of rear subframe. The bolt on for Wisefab axle is E60 M5 differential, which has a flange for bigger inner CV joint or we have a bracket to fit E32/E34 TYP 210 LSD or with different bracket E36 TYP 210 LSD differential, that was used only with 3.2liter engine.
  • 7075-T6 billet CNC machined differential cover. The rear differential cover is also structural part, therefore it is made of 7075-T6 aluminium. It is stronger and has slighly bigger oil capacity.
  • Subframe, links and arms are made of high strength steel to have required strength. Subframe, arms links and uprights are designed the way that in case of damage, the arms are the first to brake as these are the easiest to replace .
  • Motion ratio (shock stroke /wheel stroke) is 0,935, when originally it is 1,1. It would give 17% more wheeltravel. For example with 200mm shock absorber stroke the Wisefab axle wheeltravel is 216mm, when originally it has 184mm with the same shock absorber stroke. On spring stiffness side it means that about 35% stiffer springs should be used compared to original axle to get the same wheelrate.
  • Halfshafts are equal length for ease of replacements.
  • Room for bigger CV joints. The uprights and subframe is designed to fit much stronger 120mm diameter CV joints that can be found from E60M and E90M. (CV-s and shafts are not included in the kit)
  • Tested with 260mm stroke shock absorbers, which made 280mm of wheeltravel.
  • Room left for 2x62mmOD muffler tubes.
  • If wheelspeed reading is important, then E90 rear wheelbearings should be used instead of E36 M3 ones and E90 wheelspeed sensor, that attaches to upright.
  • All the components are zink coated.
More Information
Make BMW
Field Rally
Placement Rear
Prodmaster Name Suspension kit for E32 210Diff
color_swatch No
Wisefab allow me to do things that I never thought possible behind the wheel of my car! It's not a luxury anymore in competitive drifting it's a necessity!

Spare parts

All
Complete parts
Left Knuckle
Right Knuckle
Left Suspension Arm #2
Right Suspension Arm #2
Suspension Arm #7
Suspension Arm #3
Left Suspension Arm #5
Right Suspension Arm #5
Left Suspension Arm #2 Bracket
Right Suspension Arm #2 Bracket
Subframe
Final Drive Cover
Toelink Mount
Final Drive Rear Mount
Skid Plate
TYP210 Final Drive Mount

Complete parts

Complete parts

1
Knuckle
Left
WF366_100LA
$370.00
excluding VAT
Right
WF366_100RA
$370.00
excluding VAT
2
Suspension Arm #2
Left
WF366_200LA
$245.00
excluding VAT
Right
WF366_200RA
$245.00
excluding VAT
3
Suspension Arm #7
WF366_700A
$175.00
excluding VAT
4
Suspension Arm #3
WF366_300A
$370.00
excluding VAT
5
Suspension Arm #5
Left
WF366_500LA
$295.00
excluding VAT
Right
WF366_500RA
$295.00
excluding VAT
6
Suspension Arm #2 Bracket
Left
WF366_210LA
$110.00
excluding VAT
Right
WF366_210RA
$110.00
excluding VAT
7
Subframe
WF366_400A
$590.00
excluding VAT
8
Final Drive Cover
WF366_601A
$415.00
excluding VAT
9
Toelink Mount
WF366_600A
$125.00
excluding VAT
10
Final Drive Rear Mount
WF366_620A
$110.00
excluding VAT
11
Skid Plate
WF366_800
$160.00
excluding VAT
12
TYP210 Final Drive Mount
WF366_630A
$125.00
excluding VAT

Left Knuckle

Left Knuckle

1
Knuckle
Left
WF366_100LA
$370.00
excluding VAT
2
Bolt Hex M10x1.5x 65 RH 10.9 ST DIN 931
B01110150065R3SD931
$3.40
excluding VAT
3
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
B01112150070R3SD960
$8.00
excluding VAT
4
Washer Flat M12 ZN DIN125
B03112NAZD125
$1.80
excluding VAT
5
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$1.80
excluding VAT
6
Bolt Hex M12x1.5x 80 RH 10.9 ST DIN 960
B01112150080R3SD960
$8.00
excluding VAT
7
Bolt Allen M 6x1.0x 16 RH 8.8 ZN DIN 912
B01206100016R2ZD912
$1.80
excluding VAT
8
Washer Flat M 6 ZN DIN125
B03106NAZD125
$1.80
excluding VAT
9
Scraper
Left
WF366_108L
$18.00
excluding VAT

Right Knuckle

Right Knuckle

1
Knuckle
Right
WF366_100RA
$370.00
excluding VAT
2
Bolt Hex M10x1.5x 65 RH 10.9 ST DIN 931
B01110150065R3SD931
$3.40
excluding VAT
3
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
B01112150070R3SD960
$8.00
excluding VAT
4
Washer Flat M12 ZN DIN125
B03112NAZD125
$1.80
excluding VAT
5
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$1.80
excluding VAT
6
Bolt Hex M12x1.5x 80 RH 10.9 ST DIN 960
B01112150080R3SD960
$8.00
excluding VAT
7
Bolt Allen M 6x1.0x 16 RH 8.8 ZN DIN 912
B01206100016R2ZD912
$1.80
excluding VAT
8
Washer Flat M 6 ZN DIN125
B03106NAZD125
$1.80
excluding VAT
9
Scraper
Right
WF366_108R
$18.00
excluding VAT

Left Suspension Arm #2

Left Suspension Arm #2

1
Suspension Arm #2
Left
WF366_200LA
$245.00
excluding VAT
2
Spacer ID12 OD16 h11.9
WF113_903
$10.00
excluding VAT
3
Spherical ID16/OD32
SSPHERICAL 16/32
$30.00
excluding VAT
4
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$1.80
excluding VAT
5
Spacer ID12 OD16 h10
WF013_903
$10.00
excluding VAT
6
Spacer ID12 OD16 h19
WF861_901
$10.00
excluding VAT

Right Suspension Arm #2

Right Suspension Arm #2

1
Suspension Arm #2
Right
WF366_200RA
$245.00
excluding VAT
2
Spacer ID12 OD16 h11.9
WF113_903
$10.00
excluding VAT
3
Spherical ID16/OD32
SSPHERICAL 16/32
$30.00
excluding VAT
4
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$1.80
excluding VAT
5
Spacer ID12 OD16 h10
WF013_903
$10.00
excluding VAT
6
Spacer ID12 OD16 h19
WF861_901
$10.00
excluding VAT

Suspension Arm #7

Suspension Arm #7

1
Suspension Arm #7
WF366_700A
$175.00
excluding VAT
2
Spacer ID12 OD16 h19
WF861_901
$10.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$35.00
excluding VAT
4
Spacer ID12 OD16 h 8.5
WF351_904
$9.00
excluding VAT
5
Double Adjuster Female/Male M16x1.5 M22x1.5
WF700_906
$18.00
excluding VAT
6
Bolt Hex M 8x1.25x 25 RH 12.9 ST DIN 933
B01108125025R4SD933
$1.80
excluding VAT
7
Bolt Hex M12x1.5x 50 RH 10.9 ST DIN 961
B01112150050R3SD961
$5.00
excluding VAT
8
Washer FlatSmall M12 ZN DIN433
B03212NAZD433
$1.80
excluding VAT
9
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$1.80
excluding VAT

Suspension Arm #3

Suspension Arm #3

1
Suspension Arm #3
WF366_300A
$370.00
excluding VAT
2
Spacer ID12 OD16 h 8.5
WF351_904
$9.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$35.00
excluding VAT
4
Spacer ID12 OD16 h19
WF861_901
$10.00
excluding VAT
5
Double Adjuster Female/Male M16x1.5 M22x1.5
WF700_906
$18.00
excluding VAT
6
Bolt Hex M 8x1.25x 25 RH 12.9 ST DIN 933
B01108125025R4SD933
$1.80
excluding VAT
7
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$1.80
excluding VAT
8
Spherical ID16/OD32
SSPHERICAL 16/32
$30.00
excluding VAT

Left Suspension Arm #5

Left Suspension Arm #5

1
Suspension Arm #5
Left
WF366_500LA
$295.00
excluding VAT
2
Spacer ID12 OD16 h 8.5
WF351_904
$9.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$35.00
excluding VAT
4
Spacer ID12 OD16 h19
WF861_901
$10.00
excluding VAT
5
Double Adjuster Female/Male M16x1.5 M22x1.5
WF700_906
$18.00
excluding VAT
6
Bolt Hex M 8x1.25x 25 RH 12.9 ST DIN 933
B01108125025R4SD933
$1.80
excluding VAT
7
Bolt Hex M12x1.5x100 RH 10.9 ST DIN 960
B01112150100R3SD960
$8.00
excluding VAT
8
Washer FlatSmall M12 ZN DIN433
B03212NAZD433
$1.80
excluding VAT
9
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$1.80
excluding VAT
10
Spacer ID12 OD15 h28
WF366_903
$10.00
excluding VAT
11
Spacer ID12 OD16 h11.9
WF113_903
$10.00
excluding VAT
12
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$1.80
excluding VAT
13
Spherical ID16/OD32
SSPHERICAL 16/32
$30.00
excluding VAT

Right Suspension Arm #5

Right Suspension Arm #5

1
Suspension Arm #5
Right
WF366_500RA
$295.00
excluding VAT
2
Spacer ID12 OD16 h 8.5
WF351_904
$9.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$35.00
excluding VAT
4
Spacer ID12 OD16 h19
WF861_901
$10.00
excluding VAT
5
Double Adjuster Female/Male M16x1.5 M22x1.5
WF700_906
$18.00
excluding VAT
6
Bolt Hex M 8x1.25x 25 RH 12.9 ST DIN 933
B01108125025R4SD933
$1.80
excluding VAT
7
Bolt Hex M12x1.5x100 RH 10.9 ST DIN 960
B01112150100R3SD960
$8.00
excluding VAT
8
Washer FlatSmall M12 ZN DIN433
B03212NAZD433
$1.80
excluding VAT
9
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$1.80
excluding VAT
10
Spacer ID12 OD15 h28
WF366_903
$10.00
excluding VAT
11
Spacer ID12 OD16 h11.9
WF113_903
$10.00
excluding VAT
12
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$1.80
excluding VAT
13
Spherical ID16/OD32
SSPHERICAL 16/32
$30.00
excluding VAT

Left Suspension Arm #2 Bracket

Left Suspension Arm #2 Bracket

1
Suspension Arm #2 Bracket
Left
WF366_210LA
$110.00
excluding VAT
2
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$1.80
excluding VAT
3
Washer FlatSmall M12 ZN DIN433
B03212NAZD433
$1.80
excluding VAT
4
Bolt HexThin M12x1.50x 70 RH 10.9 ST SPC
WF366_908
$13.00
excluding VAT

Right Suspension Arm #2 Bracket

Right Suspension Arm #2 Bracket

1
Suspension Arm #2 Bracket
Right
WF366_210RA
$110.00
excluding VAT
2
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$1.80
excluding VAT
3
Washer FlatSmall M12 ZN DIN433
B03212NAZD433
$1.80
excluding VAT
4
Bolt HexThin M12x1.50x 70 RH 10.9 ST SPC
WF366_908
$13.00
excluding VAT

Subframe

Subframe

1
Subframe
WF366_400A
$590.00
excluding VAT
2
Bolt Hex M12x1.5x 60 RH 10.9 ST DIN 960
B01112150060R3SD960
$5.00
excluding VAT
3
Bolt AllenFlat M10x1.50x 20 RH 8.8 ZN DIN7991
B01310150020R2ZD7991
$3.40
excluding VAT
5
Bolt Hex M12x1.5x 40 RH 10.9 ST DIN 961
B01112150040R3SD961
$5.00
excluding VAT
6
Washer Flat M12 ZN DIN125
B03112NAZD125
$1.80
excluding VAT
7
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$1.80
excluding VAT

Final Drive Cover

Final Drive Cover

1
Final Drive Cover
WF366_601A
$415.00
excluding VAT
2
Final Drive Breather Wall
WF366_610
$10.00
excluding VAT
3
Bolt AllenButton M 4x0.7x 6 RH 8.8 ZN ISO7380
B01404070006R2ZI7380
$1.80
excluding VAT
5
Fitting Pneumo 90° angle
FP_8_G1/8_A90
$8.00
excluding VAT
6
Washer Copper M10x15x1.5 ST DIN7603
B0341015SD7603
$1.80
excluding VAT
7
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
B01110150060R3SD931
$3.40
excluding VAT
8
Washer FlatSmall M10 ZN DIN433
B03210NAZD433
$1.80
excluding VAT
9
Bolt Hex M10x1.5x 30 RH 10.9 ST DIN 933
B01110150030R3SD933
$3.40
excluding VAT
10
Bolt Hex M10x1.5x 16 RH 10.9 ST DIN 933
B01110150016R3SD933
$1.80
excluding VAT
11
Washer Copper M16x20x1.5 ST DIN7603
B0341615SD7603
$1.80
excluding VAT
12
Bolt AllenPlug M16x1.5x 12 RH 8.8 ZN DIN908
B01716150012R2ZD908
$3.40
excluding VAT

Toelink Mount

Toelink Mount

1
Toelink Mount
WF366_600A
$125.00
excluding VAT
2
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
B01112150070R3SD960
$8.00
excluding VAT
3
Washer FlatSmall M12 ZN DIN433
B03212NAZD433
$1.80
excluding VAT
4
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$1.80
excluding VAT

Final Drive Rear Mount

Final Drive Rear Mount

1
Final Drive Rear Mount
WF366_620A
$110.00
excluding VAT
2
Bolt AllenFlat M10x1.50x 20 RH 8.8 ZN DIN7991
B01310150020R2ZD7991
$3.40
excluding VAT
4
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
$1.80
excluding VAT
5
Washer FlatSmall M10 ZN DIN433
B03210NAZD433
$1.80
excluding VAT
6
Bolt Hex M10x1.5x 30 RH 10.9 ST DIN 933
B01110150030R3SD933
$3.40
excluding VAT

Skid Plate

Skid Plate

1
Skid Plate
WF366_800
$160.00
excluding VAT

TYP210 Final Drive Mount

TYP210 Final Drive Mount

1
TYP210 Final Drive Mount
WF366_630A
$125.00
excluding VAT
2
Bolt Hex M14x1.5x 30 RH 10.9 ST DIN 960
B01114150030R3SD960
$5.00
excluding VAT
3
Bolt Hex M14x1.5x 50 RH 10.9 ST DIN 961
B01114150050R3SD961
$5.00
excluding VAT
4
Washer Flat M14 ZN DIN125
B03114NAZD125
$1.80
excluding VAT