Front Lower Control Arm

$680.00
excluding VAT
In stock
SKU
WFE82_200RA
or View Spares
More Information
Field Track
Placement Front
Prodmaster Name Lower Control Arm

Spare parts

2
Spacer ID14 OD16 h19
WF180_910
$13.00
excluding VAT
3
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$2.30
excluding VAT
4
Spherical ID16/OD32
SSPHERICAL 16/32
$38.00
excluding VAT
5
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
6
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
7
Lower Control Arm Rear Fixing
Right
WFE82_210RA
$140.00
excluding VAT

Right Lower Control Arm Rear Fixing

Right Lower Control Arm Rear Fixing

2
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
3
Spacer ID14 OD16 h19
WF180_910
$13.00
excluding VAT
4
Double Adjuster Female/Male M16x1.5 M22x1.5
WF700_906
$23.00
excluding VAT
5
Bolt Hex M10x1.5x 40 RH 10.9 ST DIN 931
B01110150040R3SD931
$4.30
excluding VAT
6
Washer Flat M10 ZN DIN125
B03110NAZD125
$2.30
excluding VAT
7
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
$2.30
excluding VAT
8
Bolt Hex M 8x1.25x 25 RH 12.9 ST DIN 933
B01108125025R4SD933
$2.30
excluding VAT
Wisefab Evo Suspension kit
"The change of the entire suspension geometry can now be adjusted precisely at the track. When driving the car the feeling is so honest and direct. As a driver, you understand even better how the car is behaving. "
Wisefab Evolution Track kit
"The car feels much more direct and the lowered center of gravity gives higher cornering speeds. The weight savings and the optimized geometry is important for breaking track records."
Wisefab Evo Track Kit
""The feedback is improved and the driving behavior is much more precise. The confidence in the car has improves greatly. These parts are meant for racing. Wisefab is racing!""
Wisefab Nissan GTR Suspension
"The first thing that I noticed after the installation of our Wisefab package was how much sharper the car became. It was so much better right out of the box we immediately dropped lap times just by bolting on the kit using our existing setup."