BMW E9x M3 Rear Suspension Kit

$2,150.00
excluding VAT
In stock
SKU
WF901M
or View Spares

Wisefab BMW e9x rear suspension kit can be fitted on a variety of BMW models. E90, E91, E92, E81, E82, E87, E88 models. All the metal components on E90 rear suspension are from high strenght steel, including sheetmetal components, tubes, tube ends and rod end housings. Also for weight reduction and stiffness purposes all the suspension links are designed straight and tubular or boxed type. Rod ends and spherical bearings used, no rubber bushings.

Read full description
  • M model also available. 
    Link lengths are different between nonM and M. Shock absorbers and brakes can be used either from M and nonM as components have attachments for both.
  • Revised kinematics, not just dropped knuckle. 
    If the focus is more towards performance, then the car can act better with lowered ride height, but then the factory designed kinematics wouldn't work as it supposed to. The kit would give a good kinematics with lowered car - higher roll center, , revised cambergain, anti-squat and bumpsteer for maximum grip.
  • Easy camber adjustment.
    As the top links are straight tubular type, then camber can be adjusted simply by changing their length.
  • Bump steer adjustment.
    Possibility to adjust bump steer by changing rod end location in a slot.
  • Anti-squat adjustment possibility.
    Possibility to adjust anti-squat by changing the top forward link height on upright. It can be done in less than 10 minutes at the trackside. Lowering link would increase anti-squat, raising it would decrease anti-squat.
  • Original wheelspeed sensor (ABS sensor) can be used.
  • Only takes either M model or 336mm or bigger brake discs.
    Smaller brakes will not fit.
  • Wheel bearing size should be 45x85x41

Kit includes:

  • Pre-set suspension links.
  • Uprights with hardware.
  • Subframe bushings with sperical bearings.

 

Other components

  • Hub to hub length (track) is the same as original, as this is defined by halfshaft lengths.
  • This kit assumes lower (shorter) springs or coilovers to lower the car.
  • Possibility to use bigger CV joint ø110mm (Driveshaftshop 1200 hp)

Minimum rim size is 17"

More Information
Make BMW
Field Drift
Placement Rear
Prodmaster Name Suspension Kit
color_swatch No
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres S14 for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."

Spare parts

All
Complete parts
Left Knuckle
Right Knuckle
Suspension Arm #2
Suspension Arm #3
Suspension Arm #4
Suspension Arm #6
Suspension Arm #7

Complete parts

Complete parts

1
Knuckle
Left
WF901_100LA
$370.00
excluding VAT
Right
WF901_100RA
$370.00
excluding VAT
2
Suspension Arm #2
WF901_200A
$340.00
excluding VAT
3
Suspension Arm #3
WF901_300A
$175.00
excluding VAT
4
Suspension Arm #4
WF901M_400A
$175.00
excluding VAT
5
Suspension Arm #6
WF901_600A
$175.00
excluding VAT
6
Suspension Arm #7
WF901_700A
$175.00
excluding VAT

Left Knuckle

Left Knuckle

1
Knuckle
Left
WF901_100LA
$370.00
excluding VAT
2
Bolt Hex M10x1.5x 35 RH 10.9 ST DIN 933
B01110150035R3SD933
$3.40
excluding VAT
3
Bolt Hex M12x1.5x 80 RH 10.9 ST DIN 960
B01112150080R3SD960
$8.00
excluding VAT
4
Washer Flat M12 ZN DIN125
B03112NAZD125
$1.80
excluding VAT
5
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$1.80
excluding VAT
6
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
B01110150060R3SD931
$3.40
excluding VAT
7
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
$1.80
excluding VAT
8
Washer Flat M10 ZN DIN125
B03110NAZD125
$1.80
excluding VAT
9
Bolt Hex M10x1.5x 55 RH 10.9 ST DIN 931
B01110150055R3SD931
$3.40
excluding VAT
11
Bolt Hex M10x1.5x 90 RH 10.9 ST DIN 931
B01110150090R3SD931
$5.00
excluding VAT
12
BushingT ID10 OD24 h10
WF901_905
$9.00
excluding VAT
13
Brake Adapter
WF901_121
$13.00
excluding VAT
14
Pin Spring 6x10 Normal ST DIN1481
B05206010NSD1481
$1.80
excluding VAT
15
Nut Nylock M 8x1.25 RH 8.8 ZN DIN985-8
B02208125R2ZD9858
$1.80
excluding VAT
16
Washer Flat M 8 ZN DIN125
B03108NAZD125
$1.80
excluding VAT
17
Bolt Hex M 8x1.25x 45 RH 8.8 ZN DIN 931
B01108125045R2ZD931
$1.80
excluding VAT

Right Knuckle

Right Knuckle

1
Knuckle
Right
WF901_100RA
$370.00
excluding VAT
2
Bolt Hex M10x1.5x 35 RH 10.9 ST DIN 933
B01110150035R3SD933
$3.40
excluding VAT
3
Bolt Hex M12x1.5x 80 RH 10.9 ST DIN 960
B01112150080R3SD960
$8.00
excluding VAT
4
Washer Flat M12 ZN DIN125
B03112NAZD125
$1.80
excluding VAT
5
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$1.80
excluding VAT
6
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
B01110150060R3SD931
$3.40
excluding VAT
7
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
$1.80
excluding VAT
8
Washer Flat M10 ZN DIN125
B03110NAZD125
$1.80
excluding VAT
9
Bolt Hex M10x1.5x 55 RH 10.9 ST DIN 931
B01110150055R3SD931
$3.40
excluding VAT
11
Bolt Hex M10x1.5x 90 RH 10.9 ST DIN 931
B01110150090R3SD931
$5.00
excluding VAT
12
BushingT ID10 OD24 h10
WF901_905
$9.00
excluding VAT
13
Brake Adapter
WF901_121
$13.00
excluding VAT
14
Pin Spring 6x10 Normal ST DIN1481
B05206010NSD1481
$1.80
excluding VAT
15
Nut Nylock M 8x1.25 RH 8.8 ZN DIN985-8
B02208125R2ZD9858
$1.80
excluding VAT
16
Washer Flat M 8 ZN DIN125
B03108NAZD125
$1.80
excluding VAT
17
Bolt Hex M 8x1.25x 45 RH 8.8 ZN DIN 931
B01108125045R2ZD931
$1.80
excluding VAT

Suspension Arm #2

Suspension Arm #2

1
Suspension Arm #2
WF901_200A
$340.00
excluding VAT
2
Suspension Arm #2 Bushing
WF901_280A
$85.00
excluding VAT
3
Shock Absorber Bracket
WF901_500A
$70.00
excluding VAT
4
Spacer ID12 OD16 h18
WF136_903
$10.00
excluding VAT
5
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$1.80
excluding VAT
6
Spherical ID16/OD32
SSPHERICAL 16/32
$30.00
excluding VAT
7
BushingT ID10 OD18 h10
WF901_904
$9.00
excluding VAT
8
Bolt Allen M10x1.5x 35 RH 12.9 ST DIN 912
B01210150035R4SD912
$1.80
excluding VAT

Suspension Arm #3

Suspension Arm #3

1
Suspension Arm #3
WF901_300A
$175.00
excluding VAT
2
Suspension Arm #3 Bushing
WF901_380A
$85.00
excluding VAT
3
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$3.40
excluding VAT
5
Rod end 12x1.5 RH male CrMo
SRODEND12X1.5 RH M
$25.00
excluding VAT
6
Spacer ID10 OD12 h14
WF080_906
$10.00
excluding VAT

Suspension Arm #4

Suspension Arm #4

1
Suspension Arm #4
WF901M_400A
$175.00
excluding VAT
2
Spacer ID12 OD14 h14
WF113_905
$10.00
excluding VAT
3
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$25.00
excluding VAT
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$3.40
excluding VAT
6
Rod end 12x1.5 RH male CrMo
SRODEND12X1.5 RH M
$25.00
excluding VAT
7
Spacer ID10 OD12 h 7
WF862_902
$9.00
excluding VAT

Suspension Arm #6

Suspension Arm #6

1
Suspension Arm #6
WF901_600A
$175.00
excluding VAT
2
Spacer ID12 OD14 h14
WF113_905
$10.00
excluding VAT
3
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$25.00
excluding VAT
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$3.40
excluding VAT
6
Rod end 12x1.5 RH male CrMo
SRODEND12X1.5 RH M
$25.00
excluding VAT
7
Spacer ID10 OD12 h14
WF080_906
$10.00
excluding VAT

Suspension Arm #7

Suspension Arm #7

1
Suspension Arm #7
WF901_700A
$175.00
excluding VAT
2
Spacer ID12 OD14 h14
WF113_905
$10.00
excluding VAT
3
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$25.00
excluding VAT
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$3.40
excluding VAT
6
Rod end 12x1.5 RH male CrMo
SRODEND12X1.5 RH M
$25.00
excluding VAT
7
Spacer ID10 OD12 h 7
WF862_902
$9.00
excluding VAT