Infiniti G37 Rear Suspension Drop Knuckle Kit

$2,500.00
excluding VAT
In stock
SKU
WF371
or View Spares

Wisefab Infiniti G37 Rear Suspension kit will give a good kinematics with lowered car - higher roll center, lowered antisquat, revised camber gain and bump steer for maximum grip. Built in anti-squat and camber adjustment. All the links are pre set by Wisefab. No need to change the lenghts. Easy to install and set up. Every nut and bolt is available for spare parts. Scroll down to order your spare parts here. 

Check out the Infiniti G37 Angle kit.

Here is our recommended alignment parameters:
Toe in/out: 3-10mm toe in/per side
Camber: -0,5

 
  • Revised kinematics, not just dropped knuckle.
    Wisefab Infiniti G37 kit will give a good kinematics with lowered car - higher roll center, antisquat, revised cambergain and bumpsteer for maximum grip.
  • About the same weight as original aluminium suspension.
    All the metal components on Wisefab G37 rear suspension are from high strenght steel, including sheetmetal components, tubes, tube ends and rod end housings.
  • Easy camber adjustment.
    Special teethed washer is used for adjustment.
  • Bump steer adjustment.
    Possibility to adjust bump steer by changing rod end location in a slot.
  • Anti-squat adjustment.
    Possibility to adjust anti-squat by changing the top forward link height on upright.
  • Adjustable antiroll bar (swaybar) motion ratio.
    There are 3 possibilities for antiroll bar drop link attachments. 
    Changing antiroll bar motion ratio is quick and easy way to tune your car understeer/oversteer.

Kit includes:

  • Pre-set suspension links.
  • Knuckles with hardware.
  • Pick-up pount relocating bracket.
  • Installation guide.

Other components

  • Hub to hub length (track) is the same as original, as this is defined by halfshaft lengths.
  • This kit assumes coilovers to adjust ride height and use spring around the shock not on rear link.
  • Possibility to use either original 370Z , 350Z or S-Chassis hub with bigger CV joint.

Minimum rim size is 17.

More Information
Make Infiniti
Field Drift
Placement Rear
Prodmaster Name Suspension Drop Knuckle Kit

Spare parts

All
Complete parts
Right Knuckle
Left Knuckle
Suspension Arm #2
Left Suspension Arm #3
Right Suspension Arm #3
Suspension Arm #4
Suspension Arm #5

Complete parts

Complete parts

1
Knuckle
Right
WF371_100RA
$530.00
excluding VAT
Left
WF371_100LA
$530.00
excluding VAT
2
Suspension Arm #2
WF371_200A
$220.00
excluding VAT
3
Suspension Arm #3
Left
WF371_300LA
$425.00
excluding VAT
Right
WF371_300RA
$425.00
excluding VAT
4
Suspension Arm #4
WF371_400A
$300.00
excluding VAT
5
Suspension Arm #5
WF371_500A
$220.00
excluding VAT

Right Knuckle

Right Knuckle

2
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
B01112150070R3SD960
$9.40
excluding VAT
3
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$2.30
excluding VAT
4
Washer FlatSmall M10 ZN DIN433
B03210NAZD433
$2.30
excluding VAT
5
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
$2.30
excluding VAT
6
Camber Adjustmen
WF351_118
$6.40
excluding VAT
7
Bolt Hex M10x1.5x 90 RH 10.9 ST DIN 931
B01110150090R3SD931
$6.40
excluding VAT
8
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
B01110150060R3SD931
$4.30
excluding VAT
9
Bolt Hex M10x1.5x 65 RH 10.9 ST DIN 931
B01110150065R3SD931
$4.30
excluding VAT
10
Hub Spacer
WF371_102
$11.00
excluding VAT
11
Spacer ID12 OD16 h14.5
WF113_913
$13.00
excluding VAT
12
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$2.30
excluding VAT
13
Spherical ID16/OD32
SSPHERICAL 16/32
$38.00
excluding VAT
14
BushingT ID10 OD24 h10
WF901_905
$11.00
excluding VAT
15
Washer Flat M12 ZN DIN125
B03112NAZD125
$2.30
excluding VAT

Left Knuckle

Left Knuckle

2
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
B01112150070R3SD960
$9.40
excluding VAT
3
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$2.30
excluding VAT
4
Washer FlatSmall M10 ZN DIN433
B03210NAZD433
$2.30
excluding VAT
5
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
B02210150R2ZD9858
$2.30
excluding VAT
6
Camber Adjustmen
WF351_118
$6.40
excluding VAT
7
Bolt Hex M10x1.5x 90 RH 10.9 ST DIN 931
B01110150090R3SD931
$6.40
excluding VAT
8
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
B01110150060R3SD931
$4.30
excluding VAT
9
Bolt Hex M10x1.5x 65 RH 10.9 ST DIN 931
B01110150065R3SD931
$4.30
excluding VAT
10
Hub Spacer
WF371_102
$11.00
excluding VAT
11
Spacer ID12 OD16 h14.5
WF113_913
$13.00
excluding VAT
12
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$2.30
excluding VAT
13
Spherical ID16/OD32
SSPHERICAL 16/32
$38.00
excluding VAT
14
BushingT ID10 OD24 h10
WF901_905
$11.00
excluding VAT
15
Washer Flat M12 ZN DIN125
B03112NAZD125
$2.30
excluding VAT

Suspension Arm #2

Suspension Arm #2

2
Spacer ID12 OD14 h19
WF371_902
$13.00
excluding VAT
3
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$31.00
excluding VAT
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$4.30
excluding VAT
5
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
6
Spacer ID12 OD16 h10
WF013_903
$13.00
excluding VAT
7
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT

Left Suspension Arm #3

Left Suspension Arm #3

2
Spacer ID12 OD16 h11.9
WF113_903
$13.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
4
Spacer ID12 OD16 h16.5
WF371_903
$13.00
excluding VAT
5
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
6
Spacer ID12 OD16 h14.5
WF113_913
$13.00
excluding VAT
7
Spacer ID10 OD12 h14
WF080_906
$13.00
excluding VAT
8
C-Clip InternalSTD d26 ST DIN472
B04126SD472
$2.30
excluding VAT
9
Spherical ID12/OD26
SSPHERICAL 12/26
$35.00
excluding VAT

Right Suspension Arm #3

Right Suspension Arm #3

2
Spacer ID12 OD16 h11.9
WF113_903
$13.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
4
Spacer ID12 OD16 h16.5
WF371_903
$13.00
excluding VAT
5
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
6
Spacer ID12 OD16 h14.5
WF113_913
$13.00
excluding VAT
7
Spacer ID10 OD12 h14
WF080_906
$13.00
excluding VAT
8
C-Clip InternalSTD d26 ST DIN472
B04126SD472
$2.30
excluding VAT
9
Spherical ID12/OD26
SSPHERICAL 12/26
$35.00
excluding VAT

Suspension Arm #4

Suspension Arm #4

2
ID20 OD35 Spherical Bearing Housing Washer
WF700_909
$11.00
excluding VAT
3
ID20 OD35 Spherical Bearing Housing M16x1.5
WF700_907
$105.00
excluding VAT
4
Spherical ID20/OD35
SSPHERICAL 20/35
$31.00
excluding VAT
5
C-Clip InternalSTD d35 ST DIN472
B04135SD472
$2.30
excluding VAT
6
ID20 OD35 Spherical Bearing Housing Spacer
WF700_908
$16.00
excluding VAT
7
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
8
Adjuster M14x1.5 LH FEM M16x1.5 FEM
WF371_904
$29.00
excluding VAT
9
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$4.30
excluding VAT
10
Spacer ID10 OD14 h 9
WF861_903
$11.00
excluding VAT
11
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$31.00
excluding VAT

Suspension Arm #5

Suspension Arm #5

2
Spacer ID12 OD14 h15.5
WF351_902
$13.00
excluding VAT
3
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$31.00
excluding VAT
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$4.30
excluding VAT
5
Nut Thin M12x1.5 RH 8.8 ZN DIN936/439
B02312150R2ZD936/439
$4.30
excluding VAT
6
Spacer ID10 OD12 h14
WF080_906
$13.00
excluding VAT
7
Rod end 12x1.5 RH male CrMo
SRODEND12X1.5 RH M
$31.00
excluding VAT
Wisefab Nissan 240sx
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres Nissan 240sx for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."
Nissan 240sx Drift
“When I first installed a Wisefab lock kit it truly opened the door for some more aggressive driving style. I quickly began to expect nothing less than the massive angle and performance that Wisefab provides and installed a lock kit on all (4) of my Nissan 240sx that I currently drift. Also, after testing what I though was a very competitive rear suspension solution against the latest Wisefab rear kit, I was blown away with the apparent grip gain the rear Wisefab kit yielded. I am so thankful that Wisefab has poured so much effort into creating a bolt on suspension solution that transforms a Nissan 240sx into what I believe is still the most competitive drift chassis in the world."
Nissan 240sx Lock kit
"I love the Wisefab suspension kits used on my competition and demo vehicles, they provide all the angle and grip we love along with the strength and durability we need to compete with the best!"
Toyota 86 Drift
"I wouldn't have half the results! Only by running Wisefab in my Toyota 86 it just makes the car handle so good and let's me adjust set up pretty easy which is a massive help going from track to track!"