Toyota Supra JZA80 Rear Suspension Drop Knuckle Kit

$2,500.00
excluding VAT
In stock
SKU
WF180
or View Spares

The main objective of this Wisefab Toyota Supra rear suspension kit is to provide more grip on lowered car. Either if it’s needed to maintain speed with high lock angles in drifting, to get a better start in drag racing or just being faster in circuit racing. Supra rear suspension has built in anti-squat, less camber gain, higher roll center and adjustable shock motion ratio. 

Be sure to check out our Lock kit for the MK4 Supra

Scroll down to order your spare parts conviently right here!

Here is our recommended alignment parameters:
Camber: -0,5 
Toe: 3-10mm toe in/per side

  • Higher roll center (RC). 
    On Supra rear suspension the RC is brought back in normal range on lowered car providing higher roll stiffness.
  • Less camber gain. 
    Supra rear suspension has already a lot of camber gain at original ride height. With lowered car the camber gain gets even bigger. On Wisefab setup the camber gain is decreased to provide a better grip.
  • Anti-squat. 
    Original Supra rear suspension has some negative anti-squat. That means the rear would squat a lot during acceleration. Anti-squat is changed to slightly positive to provide more stable motion at rear.
  • Adjustable spring and shock absorber motion ratio. 
    The shock has 3 attachment possibilities on rear arm, which allows to change suspension stiffness and handling very quickly without changing the spring and messing up ride heights.

Kit includes:

  • Pre-set suspension control arms.
  • Knuckles with hardware.
  • Installation guide.

 

Other components, packaging and clearance.

  • Hub to hub length (track) is the same as original, as this is defined by halfshaft lengths.
  • This kit assumes coilovers to have enough clearance.
  • Ride height is designed to be ~80mm from front subframe to ground and rear according to front.
  • Dependent on rim width and ET, inner wheel wells need to be slightly modified.
  • Minimum rim size is 17”. We have tested the kit with 9,5”x18” ET 35
    Maximum tire size that is tested is 265/35 R18.

The kit is designed and manufactured the way that after installation and toe adjustment it’s ready to use right away.

More Information
Make Toyota
Field Drift
Placement Rear
Prodmaster Name Suspension Drop Knuckle Kit

Spare parts

All
Complete parts
Left Knuckle
Right Knuckle
Left Suspension Arm #2
Right Suspension Arm #2
Suspension Arm #5
Suspension Arm #6
Suspension Arm #8
Suspension Arm #9

Complete parts

Complete parts

1
Knuckle
Left
WF180_100LA
$530.00
excluding VAT
Right
WF180_100RA
$530.00
excluding VAT
2
Suspension Arm #2
Left
WF180_200LA
$290.00
excluding VAT
Right
WF180_200RA
$290.00
excluding VAT
3
Suspension Arm #5
WF180_500A
$220.00
excluding VAT
4
Suspension Arm #6
WF180_600A
$220.00
excluding VAT
5
Suspension Arm #8
WF180_800A
$220.00
excluding VAT
6
Suspension Arm #9
WF180_900A
$230.00
excluding VAT

Left Knuckle

Left Knuckle

2
Bolt Hex M12x1.5x 60 RH 10.9 ST DIN 960
B01112150060R3SD960
$6.40
excluding VAT
3
Washer FlatSmall M12 ZN DIN433
B03212NAZD433
$2.30
excluding VAT
4
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
B01112150070R3SD960
$9.40
excluding VAT
5
BushingT ID12 OD28 h11
WF180_905
$13.00
excluding VAT
6
Bolt Hex M12x1.5x110 RH 10.9 ST DIN 960
B01112150110R3SD960
$11.00
excluding VAT
7
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$2.30
excluding VAT

Right Knuckle

Right Knuckle

2
Bolt Hex M12x1.5x 60 RH 10.9 ST DIN 960
B01112150060R3SD960
$6.40
excluding VAT
3
Washer FlatSmall M12 ZN DIN433
B03212NAZD433
$2.30
excluding VAT
4
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
B01112150070R3SD960
$9.40
excluding VAT
5
BushingT ID12 OD28 h11
WF180_905
$13.00
excluding VAT
6
Bolt Hex M12x1.5x110 RH 10.9 ST DIN 960
B01112150110R3SD960
$11.00
excluding VAT
7
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
B02212150R2ZD9858
$2.30
excluding VAT

Left Suspension Arm #2

Left Suspension Arm #2

2
Spacer ID14 OD16 h19
WF180_910
$13.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
5
BushingPOM ID20 OD24/39 h24.5
WF180_904
$13.00
excluding VAT
6
BushingT ID14 OD20 h50
WF180_902
$13.00
excluding VAT
7
Spacer ID12 OD16 h10
WF013_903
$13.00
excluding VAT
8
Spherical ID16/OD32
SSPHERICAL 16/32
$38.00
excluding VAT
9
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$2.30
excluding VAT

Right Suspension Arm #2

Right Suspension Arm #2

2
Spacer ID14 OD16 h19
WF180_910
$13.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
5
BushingPOM ID20 OD24/39 h24.5
WF180_904
$13.00
excluding VAT
6
BushingT ID14 OD20 h50
WF180_902
$13.00
excluding VAT
7
Spacer ID12 OD16 h10
WF013_903
$13.00
excluding VAT
8
Spherical ID16/OD32
SSPHERICAL 16/32
$38.00
excluding VAT
9
C-Clip InternalSTD d32 ST DIN472
B04132SD472
$2.30
excluding VAT

Suspension Arm #5

Suspension Arm #5

2
Spacer ID14 OD16 h14
WF180_909
$13.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
5
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$4.30
excluding VAT
6
Spacer ID12 OD14 h 8.5
WF180_901
$13.00
excluding VAT
7
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$31.00
excluding VAT

Suspension Arm #6

Suspension Arm #6

2
Spacer ID14 OD16 h11.5
WF180_907
$13.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
5
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$4.30
excluding VAT
6
Spacer ID12 OD14 h 8.5
WF180_901
$13.00
excluding VAT
7
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$31.00
excluding VAT

Suspension Arm #8

Suspension Arm #8

2
Spacer ID14 OD16 h15
WF180_908
$13.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
5
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$4.30
excluding VAT
6
Spacer ID12 OD14 h 8.5
WF180_901
$13.00
excluding VAT
7
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$31.00
excluding VAT

Suspension Arm #9

Suspension Arm #9

2
Spacer ID14 OD16 h15
WF180_908
$13.00
excluding VAT
3
Rod end 16x1.5 RH male CrMo
SRODEND16X1.5 RH M
$39.00
excluding VAT
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
B02316150R2ZD936/439
$4.30
excluding VAT
5
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
B02314150L2ZD936/439
$4.30
excluding VAT
6
Spacer ID12 OD14 h 8.5
WF180_901
$13.00
excluding VAT
7
Rod end 14x1.5 LH male CrMo
SRODEND14X1.5 LH M
$31.00
excluding VAT
Wisefab Nissan 240sx
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres Nissan 240sx for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."
Nissan 240sx Drift
“When I first installed a Wisefab lock kit it truly opened the door for some more aggressive driving style. I quickly began to expect nothing less than the massive angle and performance that Wisefab provides and installed a lock kit on all (4) of my Nissan 240sx that I currently drift. Also, after testing what I though was a very competitive rear suspension solution against the latest Wisefab rear kit, I was blown away with the apparent grip gain the rear Wisefab kit yielded. I am so thankful that Wisefab has poured so much effort into creating a bolt on suspension solution that transforms a Nissan 240sx into what I believe is still the most competitive drift chassis in the world."
Nissan 240sx Lock kit
"I love the Wisefab suspension kits used on my competition and demo vehicles, they provide all the angle and grip we love along with the strength and durability we need to compete with the best!"
Toyota 86 Drift
"I wouldn't have half the results! Only by running Wisefab in my Toyota 86 it just makes the car handle so good and let's me adjust set up pretty easy which is a massive help going from track to track!"